Welcomt to Focus Lighting Electronic Technology Co, Ltd!
FCS-TA LED Track Light Series
  • FCS-TA LED Track Light Series
  • FCS-TA LED Track Light Series
  • FCS-TA LED Track Light Series
  • FCS-TA LED Track Light Series
FCS-TA LED Track Light Series
【Brief 】:

1) Energy saving: using COB chip as light source, energy saving 80% than incandescent lamp, high luminous efficiency, low working temperature, electricity saving.

2) Environmental protection: no mercury, lead and other harmful substances, no pollution to the environment, no infrared and ultraviolet radiation, to avoid harm to human body, it is a green lighting product.

3) Long life: up to more than 50,000 hours.

4) DC constant current, no flicker.

5) Aluminum with good thermal conductivity (AL6063) is mainly used for good heat dissipation.

【Series】:LED Track Light
Description

1. Basic Technical Parameters        

Rated power

15W

20W

30W

40W

Power Consumption

15±0.5W

20±1W

30±1W

40±1W

Input voltage

AC 100~240V/50~60Hz

LED Quantity

  COB/1 PCS

LED Source

CREE

LED Luminous Efficiency

90-100lm/W

LED Luminous Flux

1490±10%lm

2000±10%lm

3000±10%lm

4000±10%lm

Luminaries Efficiency

>85%

Illumination Uniformity

>0.8

Illumination Uniformity

Pink for meat,Gold for bakery,3000K for Deli,4000K for Green,6500K for dairy.
2200K-6500K

Color Rendering Index

Ra≥80-90

Beam Angle

15°/23°/38°/60°

Degree of Protection

IP40

Operating Ambient Temperature

-40~50

Storage Ambient Temperature

-40~50℃(30 is the best

Lamp Operating Temperature

Ambient Temperature

The Radiator Surface of the Lamp Body

LED Lights Pin

25

50℃

60

Certificates

CERoHS

Lifespan

50000H

Dimensions

As specified in the product dimension drawings

Weight

0.9kg

1.2KG

1.9KG

1.9KG

 

  2. Luminosity     

 

 

 

NO

Item

Test methods

Through the standard

1

Temperature rise test

Ambient Temperature of 25℃, the lamp surface temperature below 65℃, LED temperature below 75℃

Ambient Temperature of 25℃, the lamp surface temperature below 65℃, LED temperature below 75℃

2

High temperature and pressure test

Ambient temperature of 60℃, enter the 1.1times rated voltage, light work 24hours

Lighting to work properly after the test

3

Low temperature and pressure test

Ambient temperature of -15℃, enter the 0.9 times rated voltage, light work 24hours

Lighting to work properly after the test

4

Vibration tests

Vibration velocity is set to 300rev/min, the amplitude is set to 2.54 cm, six surface vibration test on the packaged product.

The lamps can not occur off parts, structural damaged, the lighting does not shine and other anomalies.

5

Impact test at room temperature

Ambient temperature of 25℃, lighting 30s, lighting -30s, circulation 10,000

The lamps can not occur leakage,not lit and electrical anomalies

6

Life test

Ambient temperature of 25 ° C, lit test, the first three months every 10 days, testing, optical parameters, three months after a month testing the optical parameters, 70% of the initial luminous flux for the life of the product, turn off the lights for the absolute life

Luminous flux for 90% of the initial luminous flux of 3000 hours, 30,000 hours of luminous flux should be greater than 70% of the initial luminous flux

 

3 type track for 3 type adapter:

 

Installation:

 

Remove manual

 

Attention:

 

 

4th  Package

                

Project

Internal packing with paper tube

External packing

Q'tu

box/1

box/8

Size

195*166*H115

L370x W260x H250

N.W

1.1 kg

9kg

G.W

1.2kg

12kg

 

 

Internal package                                                    External package

 

 

                              

5th. Installation    

1.Open the lamp holder packing, take out the product and check the product have

collision scar or not, pls contact manufacturer if it damaged.

21):Confirm the orbital groove is stable and safe.

   2):Put the lamp into orbital groove,rotary switch and card clasp knob to safely

install lamps and lanterns in orbit in the channel slot can be connected to the utility

after use.

 

 

6th.Note description

 

1. All of the above test data are within the specified range of input voltage and rated output, the  working environment temperature of 25, humidity less than 85%beam angle is tested under the circumstance of 60°.

2. Noteno waterproofing effect, only for indoor use.

3. Checking the voltage, current compliance requirements; please do not disassemble product without authorized.

4. If the products can not work properly due to product quality defects, the warranty replacement within 3 years.

Pre:FCS-GG LED Garden light Series
Next:FCS-LG LED Linear Light Series