1) Energy saving: using COB chip as light source, energy saving 80% than incandescent lamp, high luminous efficiency, low working temperature, electricity saving.
2) Environmental protection: no mercury, lead and other harmful substances, no pollution to the environment, no infrared and ultraviolet radiation, to avoid harm to human body, it is a green lighting product.
3) Long life: up to more than 50,000 hours.
4) DC constant current, no flicker.
5) Aluminum with good thermal conductivity (AL6063) is mainly used for good heat dissipation.
1. Basic Technical Parameters
|
Rated power |
15W |
20W |
30W |
40W |
|
Power Consumption |
15±0.5W |
20±1W |
30±1W |
40±1W |
|
Input voltage |
AC 100~240V/50~60Hz |
|||
|
LED Quantity |
COB/1 PCS |
|||
|
LED Source |
CREE |
|||
|
LED Luminous Efficiency |
90-100lm/W |
|||
|
LED Luminous Flux |
1490±10%lm |
2000±10%lm |
3000±10%lm |
4000±10%lm |
|
Luminaries Efficiency |
>85% |
|||
|
Illumination Uniformity |
>0.8 |
|||
|
Illumination Uniformity |
Pink for meat,Gold for bakery,3000K for Deli,4000K for Green,6500K for dairy. |
|||
|
Color Rendering Index |
Ra≥80-90 |
|||
|
Beam Angle |
15°/23°/38°/60° |
|||
|
Degree of Protection |
IP40 |
|||
|
Operating Ambient Temperature |
-40℃~50℃ |
|||
|
Storage Ambient Temperature |
-40℃~50℃（30℃ is the best） |
|||
|
Lamp Operating Temperature |
Ambient Temperature |
The Radiator Surface of the Lamp Body |
LED Lights Pin |
|
|
25℃ |
50℃ |
60℃ |
||
|
Certificates |
CE、RoHS |
|||
|
Lifespan |
50000H |
|||
|
Dimensions |
As specified in the product dimension drawings |
|||
|
Weight |
0.9kg |
1.2KG |
1.9KG |
1.9KG |
2. Luminosity
|
NO |
Item |
Test methods |
Through the standard |
|
1 |
Temperature rise test |
Ambient Temperature of 25℃, the lamp surface temperature below 65℃, LED temperature below 75℃ |
Ambient Temperature of 25℃, the lamp surface temperature below 65℃, LED temperature below 75℃ |
|
2 |
High temperature and pressure test |
Ambient temperature of 60℃, enter the 1.1times rated voltage, light work 24hours |
Lighting to work properly after the test |
|
3 |
Low temperature and pressure test |
Ambient temperature of -15℃, enter the 0.9 times rated voltage, light work 24hours |
Lighting to work properly after the test |
|
4 |
Vibration tests |
Vibration velocity is set to 300rev/min, the amplitude is set to 2.54 cm, six surface vibration test on the packaged product. |
The lamps can not occur off parts, structural damaged, the lighting does not shine and other anomalies. |
|
5 |
Impact test at room temperature |
Ambient temperature of 25℃, lighting 30s, lighting -30s, circulation 10,000 |
The lamps can not occur leakage,not lit and electrical anomalies |
|
6 |
Life test |
Ambient temperature of 25 ° C, lit test, the first three months every 10 days, testing, optical parameters, three months after a month testing the optical parameters, 70% of the initial luminous flux for the life of the product, turn off the lights for the absolute life |
Luminous flux for 90% of the initial luminous flux of 3000 hours, 30,000 hours of luminous flux should be greater than 70% of the initial luminous flux |
3 type track for 3 type adapter:
Installation:
Remove manual
Attention:
4th Package
|
Project |
Internal packing with paper tube |
External packing |
|
Q'tu |
box/1 |
box/8 |
|
Size |
195*166*H115 |
L370x W260x H250 |
|
N.W |
1.1 kg |
9kg |
|
G.W |
1.2kg |
12kg |
Internal package External package
5th. Installation
1.Open the lamp holder packing, take out the product and check the product have
collision scar or not, pls contact manufacturer if it damaged.
2、1）：Confirm the orbital groove is stable and safe.
2）：Put the lamp into orbital groove,rotary switch and card clasp knob to safely
install lamps and lanterns in orbit in the channel slot can be connected to the utility
after use.
6th.、Note description
1. All of the above test data are within the specified range of input voltage and rated output, the working environment temperature of 25℃, humidity less than 85%，beam angle is tested under the circumstance of 60°.
2. Note：no waterproofing effect, only for indoor use.
3. Checking the voltage, current compliance requirements; please do not disassemble product without authorized.
4. If the products can not work properly due to product quality defects, the warranty replacement within 3 years.
